SONOFF TH Elite 16A/20A

[ubguest]

Hello Bernhard. Is there support for this device?
SONOFF TH Elite 16A/20A

The old device type can no longer be found. Bought this device.

[Bernhard]

Hey,

yes, there is, see this Repository: https://github.com/BernhardSchlegel/Brick-32 and a YouTube video https://www.youtube.com/watch?v=5TI9fxsTRmM

However, the display is not supported yet - Pull Requests are welcome!

Cheers,
Bernhard.

[ubguest]

Thank you, Bernhard... And after flashing, can I update the software over the air?

[Bernhard]

Unfortunately no, because the chip flash is less than 2x the firmware.

[ubguest]

And, now I understand why you are introducing wires from the case!
Any plans to use dry contacts?
For example, connecting a circulation pump via a relay or a distillation valve?

[Bernhard]

As far as your image says, the dry-contact is always in sync with the relay. If this is a software limitation by Sonoff, feel free to submit a PR to change that - I've open sourced the firmware for a reason (=to allow collaboration and people to contribute).

Current solution, if you want to control a circulation pump indepdentently would be to get a second Sonoff and map its relay to the circulation by drag and dropping in our software. This is the usecase described here: https://docs.bierbot.com/using-bricks/e ... types/biab

Cheers,
Bernhard.

[ubguest]

As far as your image says, the dry-contact is always in sync with the relay. If this is a software limitation by Sonoff, feel free to submit a PR to change that - I've open sourced the firmware for a reason (=to allow collaboration and people to contribute).

Bernhard, you are too kind to people!

Unfortunately I'm not a programmer. In any case, you are doing a good job, thank you very much.

[ubguest]

Greetings, Bernhard! Hasn't there been any offline use of your brainchild yet? For example, through iOS or Android applications?

[Bernhard]

Hey,

there was an Android app (which was also communicating with my backend), but taking care of multiple release streams (web and apps) takes curently too much time.

Sorry,
Bernhard.